提升機型號Elevator Model | TH315 | TH400 | TH500 | TH630 |
料斗型號Bucket Model | Zh | Sh | Zh | Sh | Zh | Sh | Zh | Sh |
輸送量Conveying capacity | m3/h | 35 | 59 | 58 | 94 | 73 | 118 | 114 | 185 |
料斗Hopper |
|
|
|
|
|
|
|
|
|
|
斗容Bucket capacity | L | 3.75 | 6 | 5.9 | 9.5 | 9.3 | 15 | 14.6 | 23.6 |
斗距Bucket distance | mm | 512 | 250 |
| 圓鋼直徑×節距Diameter of round bar×Pitch | mm | F18×64 | F22×86 |
單條破斷強度Single breaking strength | KN | ≥320 | ≥480 |
料斗運行速度Bucket speed | m/s | 1.4 | 1.5 |
傳動鏈動轉速Transmission sprocket speed | rmp | 42.5 | 37.6 | 35.3 | 31.8 |
輸送物料最大塊度The largest block of materials | mm | 35 | 40 | 50 | 60 |
注：表中斗容為斗盛水時容積，與實際填充量相近，故輸送量計算時未考填充系數Y,具體選型時應根據物料特性求得Y修正值，以此修正計算機輸送量． |
NOTE；Because the bucket capacity in the table is equal to volume of water filled in it and is similar to the filling,in terms of transportation volume,the filling coefficient y is not taken into account.Your selection should be based on the specific characteristics of materials and obtain y revised,and then calculate the volume. |
